Skip to main content

Subdivide and conquer

As inconvenient as it is to teach by Skype or any other platform during the Covid-19 isolation, I'm finding small threads of silver lining. In this instance I'm speaking of pencil and paper work.
Two of my advanced students are entering high school this fall semester and they have been given  audition music for their seating. For snare drum they are to play a portion of Etude #6 from the Anthony Cerone book 'Portraits in Rhythm'. This book has become standard literature for concert snare drum since it was first published in 1966. Complicated rhythms, phrasing, metric modulation, dynamics, these are just a few of the musical issues that Mr. Cerone has advanced for snare drum education.
Understanding subdivision is one aspect for Etude #6. Written in 5/4 this piece contains everything from Half notes down to 32nd notes which can be intimidating to the young student.
For their assignment I had them write out the rhythm counting eighth notes as the beats (making 10 beats per measure)  they scanned the project and emailed them to me to check. For their next lesson we went over their assignment and they corrected any mistakes. They now could practice their part using a metronome set for eighth notes.
This of course gave me the idea of trying this with my younger students. I wrote out exercises with the first measure filled in as an example and they have to finish the remainder. This part I haven't finished so I'll have to wait to evaluate the results.

There are tons of this type of thing that band directors and private teachers use for their students. They are an excellent resource but by doing this for my own students, I am able to develop worksheets to address specific problems and needs of each student.

Comments

  1. But how many teachers and even private instructors go this extra step? I wonder how many are doing it now? You continue to impress me, Li'l Brother!

    ReplyDelete

Post a Comment

Popular posts from this blog

The Amadinda

  The Amadinda is an African xylophone originally made from slabs of wood or even large sticks, with or without gourds for resonators. There was no reason for this project other than to see if I could make a simple mallet instrument. The box was made from plywood (which also acted as the resonators) and the bars were made from maple.  Since this was to be a true xylophone, the bars were all of equal width. Tuning was done by cutting the bars to different lengths and removing material from the bottom. Using a router I created a sort of 'stepped pyramid' instead of the traditional arc cut found on marimba or xylophone bars.  Cutting the underside is not only for tuning but it focuses the pitch and creates the characteristic overtones of the instrument. Since I wanted to play this with other 'Western' instruments, I chose to use a pentatonic scale of 2 2/5 octaves (C#,D#,F#,G#,A#,C#,D#,F#,G#,A#,C#,D#). Two people sit on either side of the instrument and strike the ends of ...

La Caverna del oro

 One of our first backpacking trips in Colorado was in the Sangre de Christo Mountains. One mountain in particular drew our attention. Marble Mountain was the location of a famous story of a Spanish cave of gold. There are many places on the web that tell this story better than I could, suffice it to say that we wanted to locate it and see the iconic 'Maltese Cross' located at it's entrance.  In 1974 after I got out of the Army we invited some friends to join us on this trip. We parked our car at the trailhead in the Wet Mountain Valley and backpacked up Marble Mountain to 12,000 feet. In one of the culverts we found the entrance to the cave. Maltese Cross at the Caverna del oro It turned out to be a real thing. The large red cross was still visible after 400 yrs. According to legend the Spanish put it there in the 1600's. I did have the courage to crawl into it but only a few feet. After about 10 feet there is a vertical shaft that drops about 750 feet!  The Cross is v...

Matte Black

 I just realized that this sounds like a 'James Bond' type spy thriller. Actually it involves my attempts to produce a non-reflective finish for so many of my aluminum projects. Powder coating and anodizing are the typical processes to produce this finish but they are expensive or require car battery chargers and caustic chemicals for the DIYers.  I've tried a flat black paint using etching preps etc. but they all resulted in the paint chipping off quickly when tossed around and hitting other things in an accessory case. Since I use a 2 part epoxy to connect the parts of the Nickster together with perfect results, I thought about using this as a bass coat for the paint (see my Nickster Commemorative post). This result had promise but the finish became glossy even though I used the matte black paint in the mixture.  I came up with this idea from an accident. After the epoxy/paint mixture experiment I left some of the mixture out and some of the paint had dripped on the mix...