Skip to main content

Matte Black

 I just realized that this sounds like a 'James Bond' type spy thriller. Actually it involves my attempts to produce a non-reflective finish for so many of my aluminum projects. Powder coating and anodizing are the typical processes to produce this finish but they are expensive or require car battery chargers and caustic chemicals for the DIYers. 

I've tried a flat black paint using etching preps etc. but they all resulted in the paint chipping off quickly when tossed around and hitting other things in an accessory case. Since I use a 2 part epoxy to connect the parts of the Nickster together with perfect results, I thought about using this as a bass coat for the paint (see my Nickster Commemorative post). This result had promise but the finish became glossy even though I used the matte black paint in the mixture. 

I came up with this idea from an accident. After the epoxy/paint mixture experiment I left some of the mixture out and some of the paint had dripped on the mixture. I noticed that after it had dried the paint retained it's matte finish but also had adhered to the epoxy during it's uncured state.

So here is the process:

  1. Quickly mix the epoxy.
  2. Add a small dot of acrylic paint and continue mixing.
  3. Using a small foam paint brush, dab it into the mixture and apply it to the aluminum. This dries very fast, as soon as it becomes stringy it doesn't cover properly.
  4. After a few minutes apply only paint to the coating of epoxy.
When it dries (about 36 hrs.) the surface is a very hard matte black finish that adheres to the aluminum.
L-epoxy w/paint.      R-paint over epoxy

                                         
   

Labels:

Comments

  1. Far Side of FiftyJune 4, 2021 at 9:58 AM

    My husband says Zinc chromate primer will do as that is what they use on airplanes:)

    ReplyDelete
  2. RonaldJune 6, 2021 at 8:36 AM

    Many of the most famous discoveries and inventions were the result of accidents!

    ReplyDelete

Post a Comment

Popular posts from this blog

The Amadinda

  The Amadinda is an African xylophone originally made from slabs of wood or even large sticks, with or without gourds for resonators. There was no reason for this project other than to see if I could make a simple mallet instrument. The box was made from plywood (which also acted as the resonators) and the bars were made from maple.  Since this was to be a true xylophone, the bars were all of equal width. Tuning was done by cutting the bars to different lengths and removing material from the bottom. Using a router I created a sort of 'stepped pyramid' instead of the traditional arc cut found on marimba or xylophone bars.  Cutting the underside is not only for tuning but it focuses the pitch and creates the characteristic overtones of the instrument. Since I wanted to play this with other 'Western' instruments, I chose to use a pentatonic scale of 2 2/5 octaves (C#,D#,F#,G#,A#,C#,D#,F#,G#,A#,C#,D#). Two people sit on either side of the instrument and strike the ends of ...
3 comments
Read more

La Caverna del oro

 One of our first backpacking trips in Colorado was in the Sangre de Christo Mountains. One mountain in particular drew our attention. Marble Mountain was the location of a famous story of a Spanish cave of gold. There are many places on the web that tell this story better than I could, suffice it to say that we wanted to locate it and see the iconic 'Maltese Cross' located at it's entrance.  In 1974 after I got out of the Army we invited some friends to join us on this trip. We parked our car at the trailhead in the Wet Mountain Valley and backpacked up Marble Mountain to 12,000 feet. In one of the culverts we found the entrance to the cave. Maltese Cross at the Caverna del oro It turned out to be a real thing. The large red cross was still visible after 400 yrs. According to legend the Spanish put it there in the 1600's. I did have the courage to crawl into it but only a few feet. After about 10 feet there is a vertical shaft that drops about 750 feet!  The Cross is v...
3 comments
Read more

Quack, Moo and Paradiddle

Rudiments: "The basic principles or skills of a particular subject." Onomatopoeia: "A word that is phonetically associated with the word it describes." Scales are for a violinist as drum rudiments are for the drummer. To master anything one must learn the basic rudiments. Once learned they can be assembled to create something more than the individual parts. Drum Rudiments are a collection of sticking patterns and bounces that were developed to provide the beginning drummer the skills to play his/her instrument. But why the funny names? Most of the Rudiment names are onomatopoeiae. They imitate the sound of the rudiment/sticking. They were developed in the late seventeenth and eighteenth centuries and the use of onomatopoeia was to help the student memorize them. Since many people were illiterate at the time, this technique was easier than using notation.  The teacher would say the name of the rudiment and then play it. The student would repeat the name and play it. ...
2 comments
Read more