Skip to main content

Zucchini Parmesan & Choke Cherry Shrub

We have finally grown more zucchini this year so we started looking for recipes other than our traditional zucchini bread, batter fried or sauteed.  Since the larger ones look like eggplant when sliced, we thought about replacing the eggplant with zucchini to make zucchini parmesan. It worked! Zucchini isn't bitter like eggplant can be and it doesn't need to have excess moisture removed. It's also not a Nightshade plant (I've read that some people have issues with Nightshades). We just followed an eggplant parmesan recipe and used the zucchini instead.
We also had a lot of choke cherries from our small 8' tree (bush?) About 10 years ago I read about making 'shrubs'. Before soft drinks were commercially available, people would make a shrub from cherries, berries and other fruit. It's basically a concentrated syrup that can be added to water, sparkling water, gin, vodka or whatever. We got enough choke cherries to make 2 quarts.
Labels:

Comments

Post a Comment

Popular posts from this blog

The Amadinda

  The Amadinda is an African xylophone originally made from slabs of wood or even large sticks, with or without gourds for resonators. There was no reason for this project other than to see if I could make a simple mallet instrument. The box was made from plywood (which also acted as the resonators) and the bars were made from maple.  Since this was to be a true xylophone, the bars were all of equal width. Tuning was done by cutting the bars to different lengths and removing material from the bottom. Using a router I created a sort of 'stepped pyramid' instead of the traditional arc cut found on marimba or xylophone bars.  Cutting the underside is not only for tuning but it focuses the pitch and creates the characteristic overtones of the instrument. Since I wanted to play this with other 'Western' instruments, I chose to use a pentatonic scale of 2 2/5 octaves (C#,D#,F#,G#,A#,C#,D#,F#,G#,A#,C#,D#). Two people sit on either side of the instrument and strike the ends of ...
3 comments
Read more

La Caverna del oro

 One of our first backpacking trips in Colorado was in the Sangre de Christo Mountains. One mountain in particular drew our attention. Marble Mountain was the location of a famous story of a Spanish cave of gold. There are many places on the web that tell this story better than I could, suffice it to say that we wanted to locate it and see the iconic 'Maltese Cross' located at it's entrance.  In 1974 after I got out of the Army we invited some friends to join us on this trip. We parked our car at the trailhead in the Wet Mountain Valley and backpacked up Marble Mountain to 12,000 feet. In one of the culverts we found the entrance to the cave. Maltese Cross at the Caverna del oro It turned out to be a real thing. The large red cross was still visible after 400 yrs. According to legend the Spanish put it there in the 1600's. I did have the courage to crawl into it but only a few feet. After about 10 feet there is a vertical shaft that drops about 750 feet!  The Cross is v...
3 comments
Read more

Matte Black

 I just realized that this sounds like a 'James Bond' type spy thriller. Actually it involves my attempts to produce a non-reflective finish for so many of my aluminum projects. Powder coating and anodizing are the typical processes to produce this finish but they are expensive or require car battery chargers and caustic chemicals for the DIYers.  I've tried a flat black paint using etching preps etc. but they all resulted in the paint chipping off quickly when tossed around and hitting other things in an accessory case. Since I use a 2 part epoxy to connect the parts of the Nickster together with perfect results, I thought about using this as a bass coat for the paint (see my Nickster Commemorative post). This result had promise but the finish became glossy even though I used the matte black paint in the mixture.  I came up with this idea from an accident. After the epoxy/paint mixture experiment I left some of the mixture out and some of the paint had dripped on the mix...
2 comments
Read more