Skip to main content

The Three Camps

The Three Camps is a snare drum solo with quite a history behind it. This was one of three solos that my brother had me memorize when I was his student. In the mid 80's I attended a percussion history lecture/demonstration given by William F. Ludwig II whose father was the co-founder of the famous Ludwig Drum Company in 1909.
This is the story of The Three Camps as I remember from his lecture.

The Three Camps goes back to at least the French and Indian War. When the troops were traveling from point A to point B they would have to bivouac every night (no Holiday Inns at the time). To guard against surprise attacks during the night they would break into 3 groups. The first group would stop and make camp while the rest would continue on. Far enough away but still within ear shot the second group would make their camp followed by the third group doing the same.
At daybreak the drummer from the first group would play the 'First Camp'. The last roll of the 'First Camp', the drummer of the second group would join in and continue playing the 'Second Camp' and the first drummer stopped. On the final roll of the 'Second Camp', the third drummer would join in and continue through the 'Third Camp' as the second drummer stopped. Finally all three drummers would play the final section to the end. Hence the title 'The Three Camps'.

The logic behind this was to assure to each group that the others were safe through the night. If by chance one group were ambushed and captured one of the sections of the solo would not be played and therefore the remaining two groups realized the danger. But what if the enemy's drummer would play the proper section? The three drummers knew how each other played this solo, spending their days together they would constantly play separately and together. In time they would recognize the slight differences of each others playing just as one would recognize the sound of a friend's voice.
Some of the specifics of this story might be wrong (remember he told me this some 35 years ago) so any variations can be attributed to my lack of memory.

After the lecture was over I went up to tell him how much I enjoyed it and found the story so compelling. After relating that my brother required me to memorize this solo he was disappointed that we didn't speak before the lecture. He would have had me play one of the sections at the opposite end of the room as he played another section.
We spent an hour talking about the history of drummers during war time, how the differences of drum depth would dictate the tempo of solos- during the Revolution drums were quite deep therefore the drummers would march slower around 86bpm. By the time of the Civil War the drums were much shorter allowing the tempo to be faster.

Comments

  1. Very interesting! I have never heard this before! Thanks for sharing!

    ReplyDelete

Post a Comment

Popular posts from this blog

La Caverna del oro

 One of our first backpacking trips in Colorado was in the Sangre de Christo Mountains. One mountain in particular drew our attention. Marble Mountain was the location of a famous story of a Spanish cave of gold. There are many places on the web that tell this story better than I could, suffice it to say that we wanted to locate it and see the iconic 'Maltese Cross' located at it's entrance.  In 1974 after I got out of the Army we invited some friends to join us on this trip. We parked our car at the trailhead in the Wet Mountain Valley and backpacked up Marble Mountain to 12,000 feet. In one of the culverts we found the entrance to the cave. Maltese Cross at the Caverna del oro It turned out to be a real thing. The large red cross was still visible after 400 yrs. According to legend the Spanish put it there in the 1600's. I did have the courage to crawl into it but only a few feet. After about 10 feet there is a vertical shaft that drops about 750 feet!  The Cross is v...

The Deagan Project: Part II

Escutcheon Pins, Washers and Isolators Most of the pins were bent but easily straightened. Just tapping them on a bench vise did the job. I replaced the one wood screw with a sheet metal screw for the lost pin. For the washers I used silicon caulking compound. Earlier this year I tried making sheets of silicon by applying caulk onto a plastic sheet protector. I placed another sheet on top and rolled it out to the desired thickness. After it cured I took a hole punch for the outside diameter of the size that I needed. The smallest punch was used for the center hole for the pin. In the past I used catheter material for the isolators but when I went to a medical supply store to find the size that I needed I was asked for my doctor's prescription. A prescription?.....Are they afraid that I'm going to insert a piece of plastic into parts of my body just for the...….never mind. OK, so nix the catheter tubes. Since I was working with silicon I tried a di...

The Amadinda

  The Amadinda is an African xylophone originally made from slabs of wood or even large sticks, with or without gourds for resonators. There was no reason for this project other than to see if I could make a simple mallet instrument. The box was made from plywood (which also acted as the resonators) and the bars were made from maple.  Since this was to be a true xylophone, the bars were all of equal width. Tuning was done by cutting the bars to different lengths and removing material from the bottom. Using a router I created a sort of 'stepped pyramid' instead of the traditional arc cut found on marimba or xylophone bars.  Cutting the underside is not only for tuning but it focuses the pitch and creates the characteristic overtones of the instrument. Since I wanted to play this with other 'Western' instruments, I chose to use a pentatonic scale of 2 2/5 octaves (C#,D#,F#,G#,A#,C#,D#,F#,G#,A#,C#,D#). Two people sit on either side of the instrument and strike the ends of ...