Skip to main content

Castanets

In 2012 the YS programed Carmina Burana for their final concert. The one instrument the section needed was a professional pair of castanets. Until then the only thing we had was a castanet machine that I made in the 70's that worked OK if the sound was covered up by the rest of the orchestra. However, this was a solo part and should be played with a pair of hand mounted castanets. Because time and money was short I had the percussionist use my Epstein's for the rehearsals and concerts.

My embarrassing machine castanets
After the concert I had time to think about making a set. I found a pair of 2 5/8" ebony (they were not ebony) online, using my Epstein's as a reference, I made handles and mounted them.

I then started on a design to play them as a castanet machine.  The picture below is the set of castanets and machine that I made for the Canyon Winds Band last year.


The sound of these castanets are NOT the quality of the professional level brands. They do however, produce an outstanding sound with the flexibility to be played by hand or mounted. The total cost was $75 parts and time spent.





































Labels:

Comments

  1. Far Side of FiftyOctober 22, 2019 at 7:16 PM

    You are a genius!

    ReplyDelete
  2. RonaldOctober 23, 2019 at 9:51 AM

    Jerry, I see your "mallet flower garden" in the first picture. I's something you might consider as a backgroound in the future. When you were first discussing them with me, I don't remember the block looking like that - kind of rustic? Did I miss something. On another note, I may be finally getting off my writer's blog block. Hopefully, in a day or two.

    ReplyDelete

Post a Comment

Popular posts from this blog

Tambourine Shell Repair

A broken tambourine shell usually means that a new tambourine purchase is necessary. This can be exciting: I like getting new instruments, or sad: Any instrument that is damaged is a terrible thing. All tambourine shells can break, from my famous $14 variety to top of the line brands like Grover and Black Swamp. It's easy to replace a tambourine head but broken shells/missing pins and jingles usually means an early grave for the instrument. My early attempts at these repairs were stopgap measures until a new one was found. Wood or 'super' glue used on the shell turned out to be poor choices. It wasn't until last year that I really focused on shell repair. It happened during a Canyon Winds rehearsal when one of our tambourines exploded, pins and jingles were flying everywhere. Yep, it was the Resident Gorilla playing it. The shell had cracked between three sets of jingles near the head of the tambourine. We eventually replaced this with a Black Swamp tambourine but I s...
2 comments
Read more

The Amadinda

  The Amadinda is an African xylophone originally made from slabs of wood or even large sticks, with or without gourds for resonators. There was no reason for this project other than to see if I could make a simple mallet instrument. The box was made from plywood (which also acted as the resonators) and the bars were made from maple.  Since this was to be a true xylophone, the bars were all of equal width. Tuning was done by cutting the bars to different lengths and removing material from the bottom. Using a router I created a sort of 'stepped pyramid' instead of the traditional arc cut found on marimba or xylophone bars.  Cutting the underside is not only for tuning but it focuses the pitch and creates the characteristic overtones of the instrument. Since I wanted to play this with other 'Western' instruments, I chose to use a pentatonic scale of 2 2/5 octaves (C#,D#,F#,G#,A#,C#,D#,F#,G#,A#,C#,D#). Two people sit on either side of the instrument and strike the ends of ...
3 comments
Read more

The Practice Pad

The practice pad has long been a staple for the drummer. After a pair of sticks it usually was the next thing purchased. Or in the case for my brother and I, a DIY project by our father. It could be as simple as a square of linoleum nailed on a board to the double sided models that produce various amounts of rebound.  There are many reasons for using a practice pad. I'll start with the obvious: Practical: Compared to a real drum, they are cheap. They are fairly quiet, you can play them without annoying a sleeping parent or a neighbor in an adjoining apartment. They are portable, they can be taken on a family vacation where space is at a premium. Musical: Usually they provide more rebound than a drum head, which helps in developing single strokes but especially rolls. Articulation: The sound of each stroke is cleaner giving the player important feedback on the precision of their playing. Developing positional accuracy: Drawing a circle the size of a quarter on the pad provides a ...
2 comments
Read more